Home page-->PCD Products-->SFD PCD Cutting Tool Blanks

SFD PCD Cutting Tool Blanks

SFD PCD cutting tool blanks are produced by sintering selected diamond particles at high pressure and high temperature, and consist of diamond layer and tungsten carbide substrate.

PCD Blanks provide the hardness, abrasion resistance and thermal conductivity of natural diamond, combined with the toughness of tungsten carbide. The work piece processed by PCD has good surface finish and no need being ground. It is an ideal tool material for its long life and high efficiency.

PCD is widely used for the machining of non-ferrous metals and alloys, such as aluminum, copper, aluminum / gray iron composites, as well as nonmetallic materials such as wood, chipboard, ceramics, plastic, rubber etc, where high abrasion resistance and good surface finish are required. The products are available in 5µm, 10µm and 25µm.

SFD PCD micro drill blanks
Polycrystalline diamond (PCD)micro drill blanks are composed of synthetic diamond layer and tungsten carbide substrate. They are available in 0.5-6mm diameters. Standard lengths up to 25mm.

© 2007-2010 Simple Technology. All rights reserved.

Index   |   Diamond Powder   |   Diamond Blade   |   Polishing Pad   |   CVD products   |   PCD products   |   About us   |   Contact us

UNCD is a registered trademark of; NaDiaProbe, DoSi, DOI, We Solve Hard Problems, We Haven't Even Scratched the Surface, Diamond is an Engineering Material and the ADT logo are trademarks of Advanced Diamond Technologies, Inc.

522 Dawn Cove Dr.
Henderson, NV 89052
Tel: (702)895-3442